4-3/8 Bore 1/2″ Thick Polypro

2″ Thick Polypro 3.5″ OD with 1″ Bore and keyway
CLOSEOUT SALE

Item# 2L3

1.5″ Thick Polypro 4″ OD 1″ Bore with keyway

4″ OD 2″ Thick 1″ Bore with Keyway 1.50″ Tall Teeth 0.5″ Tall Hub

4.25″ OD 1.5″ Thick Polypro

Item# 2N3

1.5″ Thick Polypro 4.5″ OD 1.25″ Bore with keyway and set screws
Item #B3037

4.5″ OD 1.5″ Thick Polypro 1.25″ Bore
Item # 2P3

(DIRECT) with 5/16″ Bolt Thur Shaft 1″ Bore
Item# 2O3

Idle Gear 1-1/4″  NAPCO STYLE

Item# 2L2

Item# 2L1

16T 6P Plp Drive Gear, Napco Style 1″ Bore

Item# 2M2

2 3/4″ OD 2 1/2″ Thick 1″ Bore with Keyway 1.53″ Tall Teeth 1.7″ Hub

3″ OD 1.53″ tall teeth .62″ tall hub 1″ bore with keyway

4.7″ OD 1.25″ Bore 1.5″ Thick Polypro

Item# 2Q3A

4.975″ OD 1″ Thick Polypro 1″ Bore
CLOSEOUT SALE

Item# 2Q3B

Rarely Used

Item# 2P2

Stainless Shaft with 2 Bolt Pattern (SPECIAL)

Item# 2M1

Item# 2L4

Polypro Drive Gear with Collar/ Bolt Style

Item# 2L5

Item# 2O4

Item# 2N1

3.82″ OD 2″ Thick 1″ Bore 1.5″ Tall Teeth .4″ Tall Hub

3 3/4″ OD 1″ Bore with keyway 1 1/2″ Bigger Bore

WITH KEYWAY END SETSCREW, NOT HEAT TREATED (ODD)

ITEM# 2E1

3-3/4″ OD 1″ Bore with keyway

Polypro Gear with Collar

Item# 2N5

Polypro Gear 1″ Bore with Setscrew and Keyway

Item# 2O2

(Unfinished) U H M W Bushing

Item# 2N4

(Needs Finished to Specs)

Item# 2N2

1-1/2″ Bore

Item# 2O5

This length is 3-1/2″ ID with a grease insert and 3/8″ bolt.

JESSUP STYLE GEAR
5.330″ OD 1-1/2″ Thick Polypro 1″ Bore with keyway 2-1/2″ Tooth Height 1″ Hub OD

JESSUP STYLE

Item# 2E4

Item# 2K2

Item# 2P5

click on thumbnail for bigger picture

Item #B3036
36 tooth, 4 pitch

This is our old style idle shaft it has a 1-1/4″ od diameter, grease insert and 3/8″ center bolt.

This is our standard drive shaft and it fits our style barrel and NAPCO. It has a 1-1/4″ center diameter with 1″ on the sides and a keyway.

16-1/2 OD 7″ Bore 1″ Thick Polypro

18″ OD 7-1/8″ Bore 1″ Thick Polypro

18-1/2″ OD 7″ Bore 1″ Thick Polypro

20-1/2″ OD 7″ Bore 1″ Thick Polypro

12-1/2″ Bolt 7″ Bore 1″ Thick Polypro

16-3/8″ OD 7″ bore 1″ Thick Polypro

Item# 1Q3

This can also be ordered as an assembly, see part below.

Item# 2H3A

These saddles are used on steel tanks. They are 5-1/2″ long, 2″ wide, and 3-5/8″ tall, and hole centers are 4-3/8″.

This saddle is used on plastic plating tanks. They are 5-1/2″ long, 2″ wide, 3-5/8″ tall and holes vary from 3-3/4″ to 4-3/4″.

We also fabricate custom sizes, call or email for a quote.
On the picture is only the copper horn.

Item# 2H3A

INSULATED DOUBLE ANODE BLOCK 8″ x 2-1/2″ POLYPRO WITH PHENOLIC INSERTS WITH ROUND HOLES ON END

Item# 2A3B

INSULATED DOUBLE ANODE BLOCK 8″ x 2-1/2″ POLYPRO WITH PHENOLIC INSERTS WITH SLOTTED HOLES ON END

Item# 2A3A

Includes 6″ copper horn, horn collar with phenolic insulator, 2 rubber horn washer, 1 stainless steel washer and 1 stainless steel nut.

We can also do this with our other horn sizes of 8-3/4″ or 12″. Please call!

2.8″ Long 1.8″ Wide 1.3″ Bore

5-3/4″ long 2″ wide slotted holes 1-3/4″

5-3/4″ long 2″ wide

1″ Pillar Block Bearings

Item# 2I4

1″ Bore with Phenolic Insert
Item# 2Q7

1-1/4″ Nut 3.3″ OD 1.75″ Tall
Part# 2B2

phenolic insert 2-1/2″ Long 2″ wide 1″ bore

Item# 2P6

1.7″ wide 2.8″ long 1.2″ bore

3-1/2″ width, 5″ od tall and a 5″ base that is 1/2″ thick, with a 1″ bore. We also have odd sizes in stock or can machine what you need!
Part# 3J2